What kind of metal do you use?

Our reclaimed metal mostly comes from the sheetmetal of old cars and trucks from the American 1960's through the 1980's. This steel sheetmetal is thick and it bends and welds very well.  Compared to European or Japanese cars of that same period in time, these American automobiles had really bad quality paint which didn't weather well over the years. This patina and its 40+ year story is what Weld House tries to capture and repurpose in the form of modern steel furniture. The "new" steel we use is still comprised of 85% recycled content and usually comes from California steel mills. 

 

What kind of metal finish do you use?

We use a high-gloss clear coat on our reclaimed sheetmetal table tops that is especially formulated to aggressively bond to raw metal. Traditional automotive clear coats do not stick to raw metal. The patina spots found on our reclaimed metal furniture is essentially exposed metal so we sourced a niche clear coat that has the high-gloss shine of automotive clear coupled the durable characteristics of an industrial top coat. 

Our steel tubing and hot roll steel is often stained with either a black or brown finish and sealed with a wax sealer that has a satin, natural luster. The wax coating can be re-applied on an ongoing basis to keep it protected and fresh, especially after a move when furniture often gets rubbed and scratched. We try to build furniture that can be touched up and keep looking great for generations. 

 

How do I take care of my automotive metal table top?

Keep your reclaimed sheetmetal table top looking great by applying your favorite brand spray wax coupled with a micro-fiber cloth.

 
weld-house-wax-cleaner
 

My automotive table top needs refinishing, what to do?

After many years of use or even abuse, you can have your local autobody shop sand and shoot a new clear coat finish on your table top. Please contact Weld House for our latest clear coat advise and how we can help facilitate that task in your local area. 

 

Can you repair damaged Weld House metal furniture?

Thankfully, metal is usually always repairable. We put alot of thought and time into our pieces and make them as bulletproof as possible. If you have actual metal damage or just damage to the finish, please contact Weld House and email photos so we can advise on the best remedy. 

 

Can my furniture be used outdoors?

More than likely your piece of Weld House furniture would have had to be built specifically for outdoor use. We would have made specific changes to make it weather resistant. 

 

Do you do commercial projects?

For years, Weld House managed large scale commercial projects that were produced on a recurring basis along side our custom orders. The quality of all our pieces is commercial quality even though they are often used in residential settings. Weld House can efficiently produce multiple quantities for commercial, restaurant or hospitality clients. 

 

Do you sell wholesale?

Our coffee tables are available at wholesale with a minimum order of 4 pieces. 

 

What are your lead times?

Lead times vary from 4 weeks to 4 months. We usually only ask for a minimal deposit so it is best to get your order started sooner rather than later. 

 

How can I order?

Please check our online store for available items that are finished and ready to ship. You are needing information on a custom piece, please email us and expect a detailed reply with pricing, options and lead times. 

 

What are your return and cancellation policies?

Please refer to our Terms and Conditions here

 

Where are you located and do you have a showroom?

We are located in the city of Cottonwood, about 1 hour and 45 minutes north of Phoenix, Arizona. We do not yet have a dedicated showroom but plan to have a gallery space in Sedona in 2017.

 

Do you ship internationally?

We can ship anywhere that DHL services.

 

Are you hiring or need an intern?

We are always interviewing and looking for those fabrication rock stars.  Also seeking sales professionals with an existing clientele.